Currently manufactured DJ mixers

Home Mix
The company introduced the Mix-3 as a part of the Home Mix TT500M package in 2007 and it is believed that it has not been sold as an individual item. It is basically an update of their Home Mix - Mix-1 and shares with it all functions and most specifications except that the audio specs are slighly better than on the previous model. The feature list is fairly basic, 2 input channels that can be switched between phono and line level and pre-amp gain/trim control for each channel, 3x 45mm faders, 2x channel faders plus a removable crossfader. Separate microphone channel with talkover and a front mounted input jack, headphone out and LED indicators for each channel, however there are only 5 LED’s per channel so not as useful as it might seem at first. This is however a perfectly functional basic mixer and as such represents an excellent value as a part of its package.

The technical specifications of the Homemix Mix-3 are: Input channels: 2 Stereo. Trim/gain controls: Both input channels + Microphone input. Cue: Both input channels. Line inputs: 4x cinch. Line input sensitivity: -14dB @ 10kohms +/-2dB . Line stage frequency response: 20Hz ~ 20kHz +/-1dB. Line stage noise spec: Less than -90dB. Phono inputs: 4x cinch, 2x grounding lug. Phono input sensitivity: -50dB @ 47kohms +/-2dB . Phono stage frequency response: 20Hz ~ 20kHz +1dB/-2dB (devir. RIAA). Phono stage noise spec: Less than -70dB. Phono in shorting required: Yes; shorting pins provided. Microphone inputs: 1x 6.35mm jack, talkover only. Microphone input sensitivity: -60dB @ 2.2kohms +/-2dB . Mic stage frequency response: 20Hz ~ 20kHz +1dB/-2dB. Mic stage noise spec: Less than -60dB. Bus outputs: 2x cinch line level 1kohms impedance, 1x 6.35mm stereo headphone jack, -2dBV (794mV) @ 33kohms +/-2dB. Line output spec: >18dB(8v) @ 100kohm load, THD=5%. Line output total harmonic distortion: Better than 3%. Headphone output spec: >4dB(1.6v) @ 32ohm load, THD=5%. Output channel balance: Better than 3dB. Bus metering: 2x 5 segment LED. Crossfader: Replaceable 45mm. Power connector: External wall wart, 9v AC 500mA.




© 1993 - 2013 Ólafur Gunnlaugsson, all rights reserved.


The site was last compiled on Sun Nov 10 2013 at 9:15:00am